Silver Rainbow Foil-Edged 350gsm Affirmation Card Deck Sample
A technical breakdown of a completed OEM card deck sample featuring silver rainbow holographic foil edging, 350gsm C2S art paper, high-gloss UV card coating, and a soft-touch matte magnetic closure box — presented as a craftsmanship reference for buyers sourcing similar finishes.
Our Process
Descriptions
OEM Disclaimer
This deck was produced as a past OEM manufacturing project for a client in the wellness and personal development category.
It is presented here solely as a craftsmanship reference and is not available for retail sale.
Buyers sourcing a similar production combination for their own custom affirmation card deck printing project are welcome to use this page as a technical benchmark.
88mm x 126mm( 2.75 x 4.75″ ) / High-gloss UV coating
Project Challenge
The core production challenge in this deck centers on reconciling three finishes operating at different tolerance levels on a single small-format card.
A high-gloss UV coating runs across the full card face, while a holographic foil treatment is confined strictly to the trim edge.
All 108 individual cards needed to carry identical foil placement without drift.
At an 88mm x 126mm trim size, the margin for foil registration error is narrow. Any lateral shift becomes visible as an uneven or partially-covered edge once the deck is fanned or shuffled.
A secondary challenge involved finish contrast at the packaging stage. Pairing a reflective, glossy card surface with a soft-touch matte box required separate coating lines and careful sequencing, so that lamination dust or residue from one process did not transfer to the other during assembly.
Tech Specs
Cards
| Parameter | Value |
|---|---|
| Trim Size | 88mm x 126mm (2.75″ x 4.75″) |
| Card Count | 108 cards |
| Material | 350gsm C2S Art Paper |
| Printing | Double-Sided CMYK |
| Surface Finish | High-Gloss UV Coating |
| Edge Finish | Silver Rainbow Holographic Foil Edging |
Packaging
| Parameter | Value |
|---|---|
| Box Type | Magnetic Closure Book-Style Box |
| Material | 157gsm Art Paper + 1200gsm Grey Cardboard |
| Printing | CMYK |
| Surface Finish | Soft-Touch Matte Lamination |
350gsm C2S Art Paper / Silver Rainbow Holographic Edging
Why This Deck Pairs a Reflective Edge with a Matte-Bound Box
The holographic foil edging on this deck serves a functional purpose beyond decoration.
On a deck intended for repeated daily handling, a foiled edge gives the pack a distinct tactile and visual boundary when fanned. That matters for a product built around a slow, deliberate card-draw ritual rather than fast-paced gameplay.
The 350gsm C2S art paper stock was selected specifically for its caliper and stiffness.
A dense, rigid sheet holds its shape under stack compression during edge foiling and resists softening at the corners across 108 cards of daily shuffling.
The coated face itself plays no role in edge adhesion. Foil bonding at the trim happens against the paper’s compressed fiber edge, not the printed surface.
Magnetic Closure Book-Style Box
At the packaging level, the soft-touch matte lamination on the box was chosen as a deliberate tactile counterpoint to the glossy card stock inside.
The box reads as calm and grounded in the hand, while the cards themselves carry the shine and color vibrancy of the artwork.
The 1200gsm grey cardboard core beneath the 157gsm printed art paper gives the book-style structure enough rigidity to support the magnetic closure mechanism through repeated open-close cycles, without the hinge softening or the magnets pulling loose from the substrate over time.
This same combination — coated card stock with edge-specific foiling, offset against a matte-finished rigid box — is directly transferable to other small-format card projects, including tarot, oracle, or affirmation-style decks where edge presentation and daily handling durability are equally important.
Factory Note
Factory Note:
Edge foiling on a deck this size is not run card-by-card — it’s a block process.
All 108 cards were cut to final trim first, then jogged and clamped into a single compressed stack so the entire edge presented as one flat, continuous surface before the foil was ever introduced.
Getting that clamp pressure right is the actual variable that decides whether the foil holds. Too loose, and the foil skins over gaps between individual sheets and flakes off in use. Too tight, and the compressed fiber edge burnishes unevenly, leaving dull patches under the holographic layer.
Just as critical is sequencing. The UV coating on the card faces has to be fully cured before the stack goes anywhere near the heated foil die — otherwise residual heat re-softens the coating at the edges and it migrates onto adjacent cards inside the clamp, showing up later as tacky corners or uneven gloss.
On this run, foiling was scheduled a full cycle after UV cure, not immediately after coating, specifically to avoid that failure mode.
Reference This Spec
If this foil-edge and matte-box combination matches a project you’re planning, you can request a sample pack of this exact deck or use this spec as reference when requesting a quote.
You’re also welcome to inquire about this finish on a different card format or trim size.












