350gsm Gold Foil Edge Affirmation Cards Deck Sample
This page documents a past OEM production run of a 350gsm affirmation card deck finished with continuous gold foil edge gilding and R3.5 rounded corners, paired with a matte-laminated 2-piece rigid box. Full technical specifications and production notes are provided as a reference sample, not for retail sale.
Our Process
Descriptions
OEM Production Disclaimer
This page documents a past OEM production run completed for a private-label client.
The deck shown here is presented strictly as a manufacturing reference sample and is not for retail sale.
The techniques applied on this project reflect the same construction methods used across our affirmation card deck printing work.
Project Challenge
Applying a continuous gold foil edge across cards die-cut with an R3.5 rounded corner presents a specific alignment problem.
The curved corner geometry breaks the straight-line foiling path, increasing the risk of foil gapping, uneven coverage, or registration drift at each rounded corner compared to a standard square-edge foil job.
Double-Sided Matte Varnish Finish
This is compounded by the double-sided matte varnish finish, which must be fully cured and free of surface residue at the trim edge before gilding.
Any leftover varnish film at the edge can weaken foil adhesion and lead to localized foil rejection.
Tech Specs
Card Specs
| Parameter | Value |
|---|---|
| Size | 70 x 120mm |
| Corner Radius | R3.5 |
| Card Stock | 350gsm art paper |
| Print Process | 4-Color CMYK Printing |
| Surface Finish | Double-Sided Matte Varnish |
| Edge Finish | Gold Foil Edge Gilding |
Box Specs
| Parameter | Value |
|---|---|
| Box Type | 2-piece rigid box |
| Box Material | 157gsm art paper + 1200gsm grey cardboard |
| Print Process | 4-Color CMYK Printing |
| Surface Finish | Matte Lamination |
The Logic Behind This Craft Combination
The rounded R3.5 corner reduces the exposed corner edge that would otherwise be the first point of wear during repeated shuffling and handling.
This matters more once that edge is gilded, since a chipped corner on a foiled edge is far more visually noticeable than on a plain paper edge.
Gold Foil Edge
Running the gold foil continuously around that rounded profile requires the foiling pressure and dwell time to stay consistent as the die head transitions from the straight sections into the curve.
That’s a control point a straight, unfoiled edge would never require.
The double-sided matte varnish is applied to both card faces rather than a gloss coating, keeping the printed surface non-reflective under normal lighting.
This keeps visual attention on the gilded edge rather than competing with a glossy card face for shine — a deliberate contrast in finish, not a uniform treatment across the whole card.
2-Piece Rigid Box
On the packaging side, the 2-piece rigid box built from 1200gsm grey cardboard wrapped in 157gsm art paper provides a firm, close-fitting enclosure.
Because the gilded edges are the most finish-sensitive surface on the card, a rigid box that holds the stack snugly reduces edge-to-edge friction during shipping and shelf handling.
Factory Note: Getting a clean, unbroken gold line around a rounded corner is harder than it looks.
On a straight edge, the foil head can run at one constant pressure and speed. The moment it hits the R3.5 curve, that pressure has to ease off slightly and the dwell time has to shorten, or the foil will crack right at the tightest point of the radius instead of sitting flush.
Our operators run this deck through a slower, segmented pass calibrated specifically to that corner radius — one setting for the straight runs, a lighter touch through the curves.
We also make sure the matte varnish has fully hardened and the sheet is completely dust-free before trimming, because even a trace of paper lint left on the cut edge is enough to leave a tiny gap in the gold line — the kind of flaw most buyers would never spot, but we always check for.
Inquire About This Finish
If you’re evaluating a similar rounded-corner, edge-foiled card project, we can share further production detail from this run.
Use this spec as reference for your own quote, or inquire about this finish to start a project-specific conversation.











